Introduction to PROMARINE®-450

PROMARINE®-450 is manufactured from unique, patented, PROMAXON® man-made calcium silicate, which provides far higher temperature resistance, with less material than conventionally mined calcium silicate.

PROMARINE®-450 contains no asbestos or other mineral fibres. No special precautions are necessary when working with the boards. HPL (High pressure laminate) is suitable for bonding to PROMARINE®-450 using a number of adhesives.

The type of adhesive to be used when bonding HPL to PROMARINE®-450 is determined by the adhesive specified on the laminate manufacturer's Type Approval Certificate, issued by the national Authority, Classification Society or Notified Body.

This adhesive will be the same as that which was successfully used in the A653(16) and MSC 61(67) testing and which will be clearly detailed in the independent laboratory Test Report submitted for the Type Approval Certificate. 

PROMARINE®-450 composite panels should not be used or stored in conditions where the relative humidity falls below 35% or above 85%, and where the temperature is above 35%.

Note: All PROMARINE®-450 Fire Tests have been conducted by IMO approved laboratories, using Production boards independently selected and labelled by
 

	National Authority
	Classification society or Notified Body representatives

Download for PROMARINE®-450 lightweight marine accommodation systems